1 thermal insulation by a shading net of 50% to 80%;
Supply and introduction of a heat shield or shade achieved by a fabric carried on the entire surface of the greenhouse.
Air -Extracteur dimension 110cm x110 cm / 1.38m x1.38m
0.75kw Power (1400R.P.M) IP55 with wiring
The cooling system installed capable of maintaining temperatures around 26 ° C when outdoor temperatures exceed 35 ° C with celdik evaporative dimension (60x100x15cm) and frame and galvanized plumbing fixture
This system automatically control humidity and temperature sensor
3-heating has forced air
A hot air generator (a oiled to a gas) to ensure complete a temperature of 18 c for outside temperature of 0 ° C see negative deviation (Gp50.Gp80.Gp100) 3phase and axial fan with thermostat 380V voltage 3F adjustable 50HZ
heating placed on a concrete slab floor or suspended
4 - IRRIGATION SYSTEMS
The system comprises:
-Canalisation LDPE or HDPE pipes of different diameter.
- Ramp LDPE with dripper.
-Head Station: mixer; injector fertilizer; dosing pump.
Localized irrigation networks
Localized irrigation systems dropwise with any suggestion of central control-related system.
Irrigation by fogging
Irrigation sprinkler or misting system with any suggestion related to the control center. (For plant production)
Semi-fixed table and table sets 1.5m x6.00m
ac is table can be equipped with a pipe connected to a boiler with all the accessories needed to heat the desired part (greenhouses nebulization).
b- table like frame for flower pots, ornamental ... ..etc.
It is a plant that controls all the system with a built-in weather station controlled temperature, humidity ... etc.
This system ensures control of the following products:
-extracteur and cooling system.
Equipped weather station:
-Sensor e rain.
Wind speed -Sensor.
The unit is protected by a power panel with a possibility of ordering the manual or automatic system.